OK, I did search and found nothing. So, I need to ask this somewhere, hopefully this is the place. The similar threads search did not seem to help much.
I have a Tab S 8.4 WiFi. I rooted it and was running Cyanogen 12. I noticed the TWRP 2.8.3.0 update, so I went to install it. TWRP manager kept crashing, so I went to the TWRP site and downloaded the SM-T 700 klimti wifi img file. I used Flashify to flash this, as I have done numerous times. I wish I'd extracted and flashed the zip in TWRP, but I did not. Everything acted normal but when the tab went to boot up it got to the Black screen that announces Samsung Galaxy S, SM-T700, Powered by android. This was it. It flashed this screen constantly every second or so. Non stop. There was nothing any button combination would do. Except it will go into download mode. Nothing else. No hard reset, nothing. Download mode it it. I spent lots of time looking at various tutorials to see what I'd missed, nothing but download mode. So, I had Odin on the computer and the latest firmware from SamMobile, so I figured I could start over and get the tablet functioning. I've used Odin a fair amount before, including the original Galaxy, S III, S4, so I'm not unfamiliar with the process.
So, Odin acts like it is doing its thing, runs through all the steps, says at the end Pass and all threads succeeded, none failed. At the end of the Odin process the tablet acts like it is booting. Up comes the Samsung name with the Bluish sparkly oval along with the standard Samsung tones we hear heading into the boot. That is as far as it goes. The blue and pink colors fade out and I am left with a black screen with SAMSUNG in the middle. Again, no button combination except download mode works at all. It just stays there. Pass showing proudly on the Odin screen. I downloaded and tried flashing all of the various firmwares, same result. I even let the battery drain to zero hoping that would shut it off. It seemed to, but the results were the same, only the download mode combination will do anything.
There is likely user error here (and realize I might kick myself in the end...Oh wait, I already have), but I've run in circles enough to realize I'm probably doing the same sequence with the same error and I not able to see what it is.
Does anyone have any idea what is wrong or how to fix this? I hope it is fixable. I had hope since download and Odin at least go through the motions. I would greatly appreciate any advice, suggestions, or help. Thanks in advance.
I have a Tab S 8.4 WiFi. I rooted it and was running Cyanogen 12. I noticed the TWRP 2.8.3.0 update, so I went to install it. TWRP manager kept crashing, so I went to the TWRP site and downloaded the SM-T 700 klimti wifi img file. I used Flashify to flash this, as I have done numerous times. I wish I'd extracted and flashed the zip in TWRP, but I did not. Everything acted normal but when the tab went to boot up it got to the Black screen that announces Samsung Galaxy S, SM-T700, Powered by android. This was it. It flashed this screen constantly every second or so. Non stop. There was nothing any button combination would do. Except it will go into download mode. Nothing else. No hard reset, nothing. Download mode it it. I spent lots of time looking at various tutorials to see what I'd missed, nothing but download mode. So, I had Odin on the computer and the latest firmware from SamMobile, so I figured I could start over and get the tablet functioning. I've used Odin a fair amount before, including the original Galaxy, S III, S4, so I'm not unfamiliar with the process.
So, Odin acts like it is doing its thing, runs through all the steps, says at the end Pass and all threads succeeded, none failed. At the end of the Odin process the tablet acts like it is booting. Up comes the Samsung name with the Bluish sparkly oval along with the standard Samsung tones we hear heading into the boot. That is as far as it goes. The blue and pink colors fade out and I am left with a black screen with SAMSUNG in the middle. Again, no button combination except download mode works at all. It just stays there. Pass showing proudly on the Odin screen. I downloaded and tried flashing all of the various firmwares, same result. I even let the battery drain to zero hoping that would shut it off. It seemed to, but the results were the same, only the download mode combination will do anything.
There is likely user error here (and realize I might kick myself in the end...Oh wait, I already have), but I've run in circles enough to realize I'm probably doing the same sequence with the same error and I not able to see what it is.
Does anyone have any idea what is wrong or how to fix this? I hope it is fixable. I had hope since download and Odin at least go through the motions. I would greatly appreciate any advice, suggestions, or help. Thanks in advance.
Aucun commentaire:
Enregistrer un commentaire